The AlpenKraft® "Klassik" is delivered to you fully assembled and is easy to set up. Should it nevertheless happen that the shower head falls apart, don't worry. Inside there is only a spring and two balls that provide the different spray types. With a few simple steps you can quickly reassemble the shower head.

1) Insert one of the two balls into the lever shaft. 

2) Insert the spring into the shaft. 

3) Place the second ball on the spring. 

4) Reinsert the gray inner part into the head. Follow the instructions in the video. 

5) Place the disc with the logo facing down into the ring. 

6) Place the large white sealing ring on the disc in the ring. Make sure the sealing ring is not installed upside down, otherwise the shower may leak! 

7) Screw the silver large ring with the disc and the gasket by hand. 

8) Note that the metal disc has two sides. The side with the logo must be visible after installation.

The replacement of the old shower head is usually possible without tools. If it is necessary to use a pipe wrench, please wrap a cloth around the hose connection to protect it from damage caused by the pipe wrench. The installation of the AlpenKraft® "Klassik" is very simple and completely possible without tools.

1) Unscrew the old shower head counterclockwise.

2) If necessary, clean the internal thread of the shower hose from old sealing residues.

3) Screw the AlpenKraft® clockwise onto your existing shower hose.

The cleaning and maintenance of your AlpenKraft® is child's play! To make it even more convenient for you, every delivery comes with a spare metal disc in a small black envelope. If you notice that the jet changes, becomes prickly, or the settings can no longer be changed, simply replace the disc and you are back in business!

1) Unscrew the large silver ring counterclockwise. 

2) Remove the metal plate including the gasket. 

3) Take the new disc out of the black envelope. 

4) Place the disc with the logo facing down into the silver ring. 

5) Place the gasket on the disc in the ring (not visible after screwing together). 

6) Screw the silver ring with metal disc and gasket clockwise onto the shower head. 

7) Drizzle the old disc with vinegar or citric acid in a shallow dish. 

8) Let the disc soak overnight in a vinegar bath. 

9) Rinse the disc with clear water and store it. 

10) Repeat every 2-3 weeks to keep AlpenKraft® ALWAYS LIKE NEW.

The change of the pearls should take place after 6-8 months. Proceed as follows:

1) Find the small silver ring in the middle of the handle.

2) Unscrew the upper part counterclockwise from the lower part.

3) Replace the beads and screw the upper part back onto the lower part clockwise.